LU5C

D mm B mm b mm d mm Z FORI TRASCINAMENTO PIN HOLES CODICE CODE   180 2,8 2,2 20 42   LU5C 0100 180 2,8 2,2 30 42   LU5C 0200 200 2,8 2,2 30 48   LU5C 0200 250 3,5 3,0 30 54   LU5C 0400 250 3,5 3,0 32 54 2/11/63 LU5C 0500 275 3,5 3,0 40 60   LU5C 0600 300 3,5 3,0 30 72 FT01 LU5C 0700 300 3,5 3,0 32 72 2/11/63 LU5C 0800 300 3,5 3,0 40 72 2/9/55+4/12/64 LU5C 0900 330 3,5 3,0 30 80   LU5C 1000 330 3,5 3,0 32 80 2/11/63 LU5C 1100 350 3,5 3,0 30 84 FT01 LU5C 1200 350 3,5 3,0 32 84 2/11/63 LU5C 1300 350 3,5 3,0 40 84 2/9/55+4/12/64 LU5C 1400 370 3,5 3,0 30 90   LU5C 1500 370 3,5 3,0 50 90 4/15/80 LU5C 1600 380 3,5 3,0 32 96 2/11/63 LU5C 1700 400 3,5 3,0 30 96 2/11/70 LU5C 1800 400 3,5 3,0 32 96 2/11/63 LU5C 1900 400 3,5 3,0 40 96 2/15/80+2/12/64 LU5C 2000 400 3,5 3,0 50 96 4/15/80 LU5C 2100 420 4,0 3,2 30 96   LU5C 2200 420 4,0 3,2 40 96   LU5C 2300 450 4,0 3,2 30 108   LU5C 2400 450 4,0 3,2 32 108 2/11/63 LU5C 2500 450 4,0 3,2 40 108 2/15/80+2/12/64 LU5C 2600 450 4,0 3,2 50 108 4/15/80 LU5C 2700 500 4,0 3,2 30 120   LU5C 2800 500 4,0 3,2 32 120 2/11/63 LU5C 2900 500 4,0 3,2 50 120 4/15/80 LU5C 3000

- available	FT01= 2/7/42 + 2/9/46,4 + 2/10/60
- temporarily out of stock

TOOTH’S FEATURES	Application: To cut solid drawn products whose thickness exceeds 5 mm. It is recommendable to use it with the sawblade over the workpiece to be cut. Machines: Mitre saws with manual or mechanical clamping of the piece. Features: Flat-triple chip tooth with negative cutting angle. Material: Aluminium and non-ferrous metals.
	Minimum and maximum RPM based on the blade diameter.