LU5D

D mm B mm b mm d mm Z FORI TRASCINAMENTO PIN HOLES CODICE CODE   160 2,8 2,2 20 42   LU5D 0100 190 2,8 2,2 30 54   LU5D 0200 200 2,8 2,2 30 60   LU5D 0300 210 2,8 2,2 30 60   LU5D 0400 216 2,8 2,2 30 60   LU5D 0500 220 3,0 2,5 30 64 FT01 LU5D 0600 230 3,0 2,5 30 64   LU5D 0700 250 3,5 3,0 30 80 FT01 LU5D 0800 250 3,5 3,0 32 80 2/11/63 LU5D 0900 250 3,5 3,0 40 80 2/9/55+4/12/64 LU5D 1000 275 3,5 3,0 40 84 2/9/55+4/12/64 LU5D 1100 300 3,5 3,0 30 96 FT01 LU5D 1200 300 3,5 3,0 32 96 2/11/63 LU5D 1300 300 3,5 3,0 40 96 2/9/55+4/12/64 LU5D 1400 330 3,5 3,0 30 104 FT01 LU5D 1500 330 3,5 3,0 32 104 2/11/63 LU5D 1600 350 3,5 3,0 30 108 FT01 LU5D 1700 350 3,5 3,0 32 108 2/11/63 LU5D 1800 350 3,5 3,0 40 108 2/9/55+4/12/64 LU5D 1900 370 3,5 3,0 30 108   LU5D 2000 370 3,5 3,0 50 108 4/15/80 LU5D 2100 380 3,5 3,0 32 108 2/11/63 LU5D 2200 400 3,5 3,0 30 120   LU5D 2300 400 3,5 3,0 32 120 2/11/63 LU5D 2400 400 3,5 3,0 40 120 2/15/80+2/12/64 LU5D 2500 400 3,5 3,0 50 120 4/15/80 LU5D 2600 420 4,0 3,2 30 120 2/11/70 LU5D 2700 420 4,0 3,2 40 120   LU5D 2800 450 4,0 3,2 30 128   LU5D 2900 450 4,0 3,2 32 128 2/11/63 LU5D 3000 450 4,0 3,2 40 128 2/15/80+2/12/64 LU5D 3100 450 4,0 3,2 50 128 4/15/80 LU5D 3200 500 4,0 3,2 30 140   LU5D 3300 500 4,0 3,2 32 140 2/11/63 LU5D 3400 500 4,0 3,2 50 140 4/15/80 LU5D 3500

- available	FT01= 2/7/42 + 2/9/46,4 + 2/10/60
- temporarily out of stock

TOOTH’S FEATURES	Application: To cut drawn products and tubes whose thickness exceeds 5 mm. It is recommendable to use it with the sawblade over the workpiece to be cut. Machines: Mitre saws with manual or mechanical clamping of the piece. Features: Flat-triple chip tooth with negative cutting angle. Material: Aluminium and non-ferrous metals.
	Minimum and maximum RPM based on the blade diameter.