LU5E |
T.C.T. SAWBLADES TO CUT NON-FERROUS METALS |
 |
D
mm |  |
B
mm | |
b
mm | |
d
mm | |
Z | |
FORI TRASCINAMENTO
PIN HOLES | |
CODICE
CODE | |
| |
| 250 | 2,8 | 2,2 | 30 | 100 | FT01 | LU5E 0100 |  |
| 250 | 2,8 | 2,2 | 32 | 100 | 2/11/63 | LU5E 0200 |  |
| 255 | 2,8 | 2,2 | 25,4 | 100 | | LU5E 0300 | |
| 255 | 2,8 | 2,2 | 25,4 | 120 | | LU5E 0400 | |
| 300 | 3,0 | 2,5 | 30 | 100 | FT01 | LU5E 0500 | |
| 305 | 3,0 | 2,5 | 25,4 | 120 | | LU5E 0600 | |
| 300 | 3,0 | 2,5 | 30 | 120 | FT01 | LU5E 0700 | |
| 300 | 3,0 | 2,5 | 32 | 120 | 2/11/63 | LU5E 0800 | |
| 350 | 3,0 | 2,5 | 30 | 100 | FT01 | LU5E 0900 | |
| 350 | 3,0 | 2,5 | 32 | 100 | 2/11/63 | LU5E 1000 | |
| 350 | 3,0 | 2,5 | 30 | 120 | FT01 | LU5E 1100 | |
| 350 | 3,0 | 2,5 | 32 | 120 | 2/11/63 | LU5E 1200 | |
|
|
- available |
FT01= 2/7/42 + 2/9/46,4 + 2/10/60 |
|
- temporarily out of stock |
TOOTH’S FEATURES |
Application: To cut special drawn products, such as tubes and similar products having ultrathin walls.
The reduced thickness allows an excellent cutting finish, without splintering, and optimises
its employment in low-power machines, too.
Machines: Mitre saws with mechanical clamping of the piece.
Features: Flat-triple chip tooth with positive cutting angle.
Material: Aluminium, non-ferrous metals. |
 |
|
|
|
Minimum and maximum RPM based on the blade diameter. |
|
 |
|
|
