LU6A

D mm B mm b mm d mm Z FORI TRASCINAMENTO PIN HOLES CODICE CODE   160 2,0 1,6 20 30 ATB   LU6A 0100 184 2,0 1,6 15,88 48 ATB   LU6A 0200 190 2,0 1,6 30 38 ATB   LU6A 0300 210 2,0 1,6 30 40 ATB   LU6A 0400 216 2,0 1,6 30 40 ATB   LU6A 0500 230 2,4 2,0 30 44 TCG   LU6A 0600 230 2,4 2,0 25,4 54 TCG   LU6A 0700 250 2,4 2,0 30 48 TCG FT01 LU6A 0800 255 2,4 2,0 25,4 50 TCG   LU6A 0900 255 2,4 2,0 25,4 60 TCG   LU6A 1000 305 2,4 2,0 25,4 60 TCG   LU6A 1100 305 2,4 2,0 25,4 80 TCG   LU6A 1200 350 2,6 2,2 30 72 TCG FT01 LU6A 1300 350 2,6 2,2 30 90 TCG FT01 LU6A 1400 355 2,6 2,2 25,4 72 TCG   LU6A 1500 355 2,6 2,2 25,4 90 TCG   LU6A 1600

- available	FT01= 2/7/42 + 2/9/46,4 + 2/10/60
- temporarily out of stock

TOOTH’S FEATURES	Application: To cut drawn products and tubes with a thickness up to 4 mm, dry cut (without lubricants). Machines: Mitre saws with manual feed. Features: Flat-triple chip tooth. Material: For ferrous metals and soft steel. WARNING: The above-mentioned sawblades are not suitable to cut the following materials: - Non-ferrous metals (aluminium, copper, brass, etc.) - Wood, glass, concrete, etc. Make sure that the workpieces to be cut are well fastened.
	Minimum and maximum RPM based on the blade diameter.