PF07MS |
CARBIDE BITS FOR MULTIBORING MACHINES |
 |
| Код |  |
D
mm | |
h
mm | |
H
mm | |
A
mm | |
Z | |
| PF07MS ZA3 | 4 | 30 | 57,5 | 10X20 | |
| PF07MS AA3 | 5 | 30 | 57,5 | 10X20 | |
| PF07MS AC3 | 5 | 43 | 70 | 10X20 | |
| PF07MS BA3 | 6 | 30 | 57,5 | 10X20 | |
| PF07MS BC3 | 6 | 43 | 70 | 10X20 | |
| PF07MS CA3 | 7 | 30 | 57,5 | 10X20 | |
| PF07MS CC3 | 7 | 43 | 70 | 10X20 | |
| PF07MS DA3 | 8 | 30 | 57,5 | 10X20 | |
| PF07MS DC3 | 8 | 43 | 70 | 10X20 | |
| PF07MS EA3 | 9 | 30 | 57,5 | 10X20 | |
| PF07MS EC3 | 9 | 43 | 70 | 10X20 | |
| PF07MS FA3 | 10 | 30 | 57,5 | 10X20 | |
| PF07MS FC3 | 10 | 43 | 70 | 10X20 | |
| PF07MS GA3 | 12 | 30 | 57,5 | 10X20 | |
| PF07MS GC3 | 12 | 43 | 70 | 10X20 | |
| PF07MS HA3 | 14 | 30 | 57,5 | 10X20 | |
| PF07MS HC3 | 14 | 43 | 70 | 10X20 | |
| PF07MS IA3 | 15 | 30 | 57,5 | 10X20 | |
| PF07MS IC3 | 15 | 43 | 70 | 10X20 | |
| PF07MS KA3 | 15 | 30 | 57,5 | 10X20 | |
| PF07MS KC3 | 16 | 43 | 70 | 10X20 | |
For multiboring machines with chucks or adapters. Suitable for
blind holes on solid wood and laminates. HW tip with center
point and M5x10-mm adjusting screw. Ø10x20 mm shank.
|
|
 |
|
|
