PC04MD

Код		D mm		d mm		H mm		A mm		Z
PC04MD 123		12				57,5		10X25		2+2
PC04MD 143		14				57,5		10X25		2+2
PC04MD 153		15				57,5		10X25		2+2
PC04MD 163		16				57,5		10X25		2+2
PC04MD 183		18				57,5		10X25		2+2
PC04MD 203		20				57,5		10X25		2+2
PC04MD 223		22				57,5		10X25		2+2
PC04MD 253		25				57,5		10X25		2+2
PC04MD 263		26				57,5		10X25		2+2
PC04MD 303		30				57,5		10X25		2+2
PC04MD 353		35				57,5		10X25		2+2
PC04MD 383		38				57,5		10X25		2+2
PC04MD 403		40				57,5		10X25		2+2

> Fit on multiboring machines with the use of chucks or adapters for obtaining hinge pockets or blind holes on solid wood or laminates. HW tip with center point and M5x10 mm adjusting screw. Ø10x25 mm shank.