PC04MS

Код		D mm		d mm		H mm		A mm		Z
PC04MS 123		12				57,5		10X25		2+2
PC04MS 143		14				57,5		10X25		2+2
PC04MS 153		15				57,5		10X25		2+2
PC04MS 163		16				57,5		10X25		2+2
PC04MS 183		18				57,5		10X25		2+2
PC04MS 203		20				57,5		10X25		2+2
PC04MS 223		22				57,5		10X25		2+2
PC04MS 253		25				57,5		10X25		2+2
PC04MS 263		26				57,5		10X25		2+2
PC04MS 303		30				57,5		10X25		2+2
PC04MS 353		35				57,5		10X25		2+2
PC04MS 383		38				57,5		10X25		2+2
PC04MS 403		40				57,5		10X25		2+2

> Fit on multiboring machines with the use of chucks or adapters for obtaining hinge pockets or blind holes on solid wood or laminates. HW tip with center point and M5x10 mm adjusting screw. Ø10x25 mm shank.