PC05MS

Код		D mm		h mm		H mm		A mm		Z
PC05MS 123		12				70		10X25		2+2
PC05MS 143		14				70		10X25		2+2
PC05MS 153		15				70		10X25		2+2
PC05MS 163		16				70		10X25		2+2
PC05MS 183		18				70		10X25		2+2
PC05MS 203		20				70		10X25		2+2
PC05MS 223		22				70		10X25		2+2
PC05MS 253		25				70		10X25		2+2
PC05MS 263		26				70		10X25		2+2
PC05MS 303		30				70		10X25		2+2
PC05MS 353		35				70		10X25		2+2
PC05MS 383		38				70		10X25		2+2
PC05MS 403		40				70		10X25		2+2

Fit on multiboring machines with the use of chucks or adapters for obtaining hinge pockets or blind holes on solid wood or laminates. HW tip with center point and M5x10 mm adjusting screw. Ø10x25 mm shank.