SV05MS |
CARBIDE COUNTERSINK CUTTERS |
 |
| Код |  |
D
mm | |
d*
mm | |
H
mm | |
A
mm | |
Z | |
| SV05MS ZA3 | 14 | 4 | 15 | TIPO/TYPE 1 | 2 |
| SV05MS AA3 | 16 | 5 | 15 | TIPO/TYPE 1 | 2 |
| SV05MS BA3 | 16 | 6 | 15 | TIPO/TYPE 1 | 2 |
| SV05MS CA3 | 18 | 7 | 15 | TIPO/TYPE 1 | 2 |
| SV05MS DA3 | 18 | 8 | 15 | TIPO/TYPE 1 | 2 |
| SV05MS EA3 | 20 | 9 | 15 | TIPO/TYPE 1 | 2 |
| SV05MS FA3 | 20 | 10 | 15 | TIPO/TYPE 1 | 2 |
| SV05MS GA3 | 22 | 12 | 15 | TIPO/TYPE 1 | 2 |
| SV05MS HA3 | 24 | 14 | 15 | TIPO/TYPE 1 | 2 |
| | | | |
|
| SV05MS TA3 | 20 | 5÷10 | 16,5 | TIPO/TYPE 2 | 2 |
| SV05MS TB3 | 22 | 11÷12 | 16,5 | TIPO/TYPE 2 | 2 |
|
*Note: “d” is the diameter of the drill bit.
> TYPE 1: E.g. 1 & 2: For multiboring bits (PF11M or PF07M). Fix to the bits helix to obtain countersinks on solid wood and laminates.
> TYPE 2: E.g. 3 & 4 : For multiboring bits (PF10M or PF06M). Fix to the bits shank to obtain countersinks on solid wood and laminates.
|
 |
|
|
