DTR02D6/DTR02S6

Код		D mm		B/b mm		d mm		Z
DTR02D6AL5		200		10		80		36+4
DTR02D6AQ5		200		10		80		47+4
DTR02D6CJ5		230		10		80		35+6
DTR02D6CR5		230		10		80		47+6
DTR02D6CU5		230		10		80		59+6
DTR02D6DR5		250		10		80		47+6
DTR02D6DU5		250		10		80		59+6
DTR02S6AL5		200		10		80		36+4
DTR02S6AQ5		200		10		80		47+4
DTR02S6CJ5		230		10		80		35+6
DTR02S6CR5		230		10		80		47+6
DTR02S6CU5		230		10		80		59+6
DTR02S6DR5		250		10		80		47+6
DTR02S6DU5		250		10		80		59+6
DTR02D6AM5		200		10		80		36+9
DTR02D6AN5		200		10		80		47+12
DTR02D6CH5		230		10		80		35+12
DTR02D6CN5		230		10		80		47+12
DTR02D6CS5		230		10		80		59+12
DTR02D6DN5		250		10		80		47+12
DTR02D6DS5		250		10		80		59+12
DTR02S6AM5		200		10		80		36+9
DTR02S6AN5		200		10		80		47+12
DTR02S6CH5		230		10		80		35+12
DTR02S6CN5		230		10		80		47+12
DTR02S6CS5		230		10		80		59+12
DTR02S6DN5		250		10		80		47+12
DTR02S6DS5		250		10		80		59+12
DTR02D6AK5		200		10		80		36+12
DTR02D6AK5		200		10		80		47+16
DTR02D6CI5		230		10		80		35+18
DTR02D6CO5		230		10		80		47+16
DTR02D6CT5		230		10		80		59+30
DTR02D6DP5		250		10		80		47+24
DTR02D6DT5		250		10		80		59+30
DTR02S6AK5		200		10		80		36+12
DTR02S6AO5		200		10		80		47+16
DTR02S6CI5		230		10		80		35+18
DTR02S6CO5		230		10		80		47+16
DTR02S6CT5		230		10		80		59+30
DTR02S6DP5		250		10		80		47+24
DTR02S6DT5		250		10		80		59+30

Application: Suited for working veneered, laminated and melamine-covered chipboard and laminates.
Machines: Single-side or double-end tenoners and squaring edgebanding machines.
Features: This hogging unit can be mounted on either a Hydro or mechanical hub. Feed rate from 20 to 80 m/min at 6000 RPM.